Why Quality Sandpaper Matters: Klingspor Wet and Dry from Germany

Klingspor sandpaper – quality wet and dry sheets made in Germany

Sandpaper looks like the simplest thing in the workshop – but anyone who has flatted a car panel with cheap paper knows it isn’t. Grit that sheds, sheets that tear the moment they get wet and one rogue scratch that shows through the clear coat can turn a two-hour job into a weekend of rework. That’s why we’ve stocked Klingspor wet and dry sandpaper for years. In this guide we explain what makes good abrasive paper, where Klingspor comes from and why Klingspor sandpaper is worth paying a little more per sheet.

Why sandpaper quality really matters

Every sheet of sandpaper is three things glued together: the abrasive grain, the bond that holds it and the backing paper. Budget papers cut corners on all three, and you feel it in the finish:

  • Uneven grit size. A few oversized grains in a 1500-grit sheet leave deep scratches that you only see after the clear coat goes on.
  • Weak bonding. Grain breaks away early, so the sheet stops cutting and you use three sheets where one should do.
  • Backing that isn’t truly waterproof. Cheap “wet and dry” paper softens, curls or tears when it’s soaked – exactly when you need it most.
  • Clogging. Poorly coated paper loads up with paint dust quickly, which causes heat, smearing and swirl marks.

The sheet itself is the cheapest part of a paint job. The real cost is your time, the paint and the lacquer you have to redo when the abrasive lets you down.

Klingspor: over 130 years of German abrasive engineering

Klingspor is a German family-owned company and one of the oldest abrasive manufacturers in the world. A few milestones from its history:

  • 1893 – Johannes Friedrich Klingspor founds the family business in Siegen, Germany.
  • 1899 – the company starts developing and making coated abrasives.
  • 1926 – Klingspor becomes Europe’s first manufacturer of waterproof (wet and dry) abrasive paper.
  • 1955 – the company moves to Haiger, Germany, still home to its headquarters and main plant.
  • 1972 – Klingspor introduces the abrasive mop disc (flap disc), now a workshop standard.
  • 1996 – its first international production plant opens in Poland.

Today Klingspor makes abrasives in its own factories, is certified to ISO 9001 for quality management and is a founding member of the oSa (Organisation for the Safety of Abrasives). It also runs its own UK operation – you can read more about the company and its full range at klingspor.co.uk. We’ve also written about our own story with the brand in Success Story part 3 – Klingspor Abrasives.

What makes Klingspor wet and dry sandpaper different

The Klingspor wet and dry sheets we sell are built for paint shops and vehicle refinishing, and every part of the sheet is chosen for that job:

  • Silicon carbide (SiC) grain – very hard and sharp, ideal for cutting paint, primer, lacquer, filler and plastics.
  • Resin bond – keeps the grain anchored when the sheet is wet, so it keeps cutting instead of shedding.
  • Closed coat – a dense layer of grain for an even, consistent scratch pattern.
  • Waterproof paper backing – A-paper is a very flexible latex paper that follows curves and body lines by hand; C-paper is stronger and stiffer for sanding blocks.
  • 19 grits from 60 to 2500 – from stripping old paint to wet flatting clear coat before polishing, all from one brand with consistent grading.

Klingspor wet and dry sandpaper at a glance – grits, sheet size and uses.

Cheap sandpaper vs Klingspor: what you actually get

Budget wet and dryKlingspor wet and dry
Grit consistencyVariable – risk of deep stray scratchesConsistent grading for a predictable finish
Wet useBacking can soften, curl or tearWaterproof backing and resin bond made for wet sanding
Sheet lifeGrain sheds and clogs quicklyKeeps cutting for longer, fewer sheets per job
Brand historyOften unbrandedGerman manufacturer, wet and dry pioneer since 1926

Choosing the right grit

Klingspor sandpaper grit guide – wet and dry grits from 60 to 2500 and what each is used for
Which Klingspor wet and dry grit to use, from paint stripping to polishing.
  • 60–120 grit: removing old paint and rust, shaping body filler.
  • 150–320 grit: levelling filler and bodywork, feathering edges.
  • 400–800 grit: flatting primer, keying paint before painting, sanding between coats.
  • 1000–2500 grit: wet flatting clear coat, removing orange peel and preparing for compound and polish.

Not sure which grits you need? Our Klingspor wet and dry sandpaper 60–2500 grit comes as single sheets or packs of 5, 10, 20 and 50 in every grit, plus five-grit mixed packs of 5, 10, 20 or 50 sheets – or choose your own mix. For more on backing papers and grain types, see our guide Coated Abrasives – Dry or Wet and Dry Sandpaper?

How to wet sand car paint with Klingspor sandpaper

Klingspor wet and dry sandpaper for car paint, primer, clear coat and body filler
Klingspor wet and dry is made for paint, primer, clear coat and filler.

Wet sanding is where good paper pays for itself. A typical clear coat flatting job looks like this:

  1. Soak the sheets. Put the paper in clean water with a drop of car shampoo for 10–15 minutes before you start, so the backing is soft and flexible.
  2. Clean the panel. Wash and degrease the area first – one trapped grain of dirt will scratch deeper than the paper.
  3. Use a block on flat areas. Wrap the sheet around a rubber or foam sanding block on panels, and use flat fingers (never fingertips) on curves and body lines.
  4. Keep it wet. Spray water constantly and wipe the slurry away with a squeegee to check progress. If the surface dries out, the paper clogs and scratches.
  5. Light pressure, straight strokes. Let the grit do the cutting, and change direction by 90° with each grade so you can see when the previous scratches are gone.
  6. Step up through the grits. Don’t skip more than one grade at a time – each finer grit only needs to remove the scratches left by the one before.
  7. Compound and polish. When the surface is an even matte with no shiny spots, clean it off, cut back the haze with compound and finish with polish.

Tip: take extra care on edges and body lines, where the clear coat is thinnest and easiest to sand through.

JobGrit sequenceWet or dry
Removing old paint and rust60 → 80 → 120Dry
Shaping and levelling body filler80 → 120 → 180 → 240Dry
Flatting primer before top coat320 → 400 → 600Wet or dry
Keying paint for a respray or blend600 → 800 → 1000Wet
Removing orange peel and runs in clear coat1200 → 1500 → 2000 → 2500Wet
Headlight restoration600 → 1000 → 1500 → 2000 → 2500Wet
Wood, varnish and lacquer between coats240 → 320 → 400Dry

Our five-grit mixed packs follow sequences like these, so one order covers the whole job – for example the 60-100-240-400-800 pack takes you from bare metal to primer, and the 1000-1200-1500-2000-2500 pack covers clear coat flatting and headlight restoration. See all options on the Klingspor wet and dry sandpaper page.

Why buy Klingspor sandpaper from The Sanding Room

  • Genuine Klingspor stock – no unbranded look-alikes.
  • Every grit from 60 to 2500, in pack sizes from 5 to 50 sheets, plus ready-made and pick-your-own mixed packs.
  • A UK family-run business trading since 2015, specialising in abrasives, tools and automotive products.
  • Trusted by thousands of customers – over 55,000 positive feedback ratings on eBay.
  • Friendly advice – not sure which grit or pack is right? Get in touch and we’ll help.

Shop Klingspor wet and dry sandpaper →

Frequently asked questions

Is Klingspor sandpaper made in Germany?

Klingspor is a German company headquartered in Haiger, Germany. It makes its abrasives in its own production plants, including its main plant in Haiger and its plant in Poland.

Is Klingspor wet and dry paper good for car paint?

Yes. The silicon carbide sheets are designed for paint, primer, varnish, filler and plastics, and are widely used for car body repair and paint refinishing.

Can I use wet and dry sandpaper dry?

Yes. It works dry or with water. Wet sanding reduces dust, heat and clogging and gives a finer finish before polishing.

Should I soak wet and dry sandpaper before use?

For wet sanding, yes. Soaking the sheets in water for 10–15 minutes softens the backing so it follows the surface and is less likely to crease. A drop of car shampoo in the water helps the paper glide and slows clogging.

What grit should I use before polishing a car?

Finish wet sanding with 2000 or 2500 grit. That leaves fine, even scratches that a cutting compound removes quickly before the final polish.

Can I buy single sheets of Klingspor sandpaper?

Yes. Every grit from 60 to 2500 is available as a single sheet, so you can top up the grade you use most, or in packs of 5, 10, 20 and 50 sheets. Five-grit mixed packs come in 5, 10, 20 and 50 sheets.